R410a R410a Refrigerant 25lb tank New Factory Sealed Lowest on Ebay Virgin Freon

This tank is filled with
25lbs
of
R410a
gas
Physical properties of R-410A refrigerant
Property
Value
Formula
CH
2
F
2
(50%)
CHF
2
CF
3
(50%)
Molecular Weight (Da)
72.6
Melting point (°C)
−155
Boiling point (°C)
−48.5
Liquid density (30°C), kg/m
3
1040
Vapour density (30°C), air=1.0
3.0
Vapour pressure at 21.1°C (MPa)
1.383
Critical temperature (°C)
72.8
Critical pressure, MPa
4.86
Gas heat capacity (kJ/(kg·°C))
0.84
Liquid heat capacity @ 1 atm, 30°C, (kJ/(kg·°C))
1.8
Specifications
Name
R410A-25lb – 25lb – Refrigerant 25lb Cylinder
Brand
Varies
Item Number
R410A
Manufacturer Product Number
R410A-25lb
SKU – PIM Number
1380216926533
ERP Number
28527
Unit of Measure
EA
Weight
25.0 Pounds (Lb)
Length
10.0 Inches (In)
Width
10.0 Inches (In)
Height
17.0 Inches (In)
Country of Origin
Var
Refrigerant
R-410a
Application
HVAC/R Refrigeration
Approvals
Varies by Manufacturer
Composition
Gas
Container Type
Cylinder
Size
25 Pound
Standards
Varies by Manufacturer
Trade Names
Varies by Manufacturer
Type
HFC
Warranty Offered
Yes
Our R410a,  requires special shipping per the USPS. this item will be shipped in compliance with all USPS regulations or will be shipped ORM-D (which requires the package be marked as such) with domestic shipping only.
The buyer must be certified by the EPA.
- The buyer must show proof of certification before paying and before the item can be shipped.

Non-EPA approved refrigerants aren’t allowed on eBay due to health and safety reasons.
Note: The Federal Clean Air Act restricts the sale and use of CFC and HCFC refrigerants to technicians certified by an EPA-approved testing organization.
With this purchase, you are stating that you are EPA certified or that this product will be used by a licensed technician.
your payment will be used as your electronic signature.
R-410A
Note:
Truck load can be mixed to make a truck or mixed to make one pallet.
Application/Description:
R-410A
is a blend of R-22 and R-125 that is 60% higher pressure than R-22 for air conditioning applications and should only be used in new equipment specifically designed to handle the pressure. Systems that are designed for
R410A
will have smaller components to perform the same cooling job as R-22.
R410A
will require POE lubricants. Retrofitting R-22 equipment is not recommended under any circumstances.
R-410A
has replaced R-22 as the preferred refrigerant for use in residential and light commercial air-conditioning and heat pump systems. It has a higher cooling capacity than R-22 and is significantly higher in pressure.
R410A
was not designed to retrofit existing R22 systems and should be used only in systems specifically designed for
R-410A
. It is non toxic and non flammable meeting the highest A1 Classification
PLEASE EMAIL FOR ANY QUESTIONS
THIS PRODUCT IS SHIPPED IN COMPLIANCE WITH FEDERAL HAZMAT REGULATIONS. THIS MEANS YOUR PRODUCT WILL BE SHIPPED WITH ALL REGULATIONS OR WILL BE SHIPPED ORM-D ( which requires the package be marked as such) WITH DOMESTIC SHIPPING ONLY